License plate relocation

[gravestarr]

For those that are looking for a cheap mod. Try this. You can cut off the inner rear fender just above the rear tag light(plastic) with whatever tool you feel suits the job. Move your license plate up to where you want it mark the hole location and drill new mounting holes. Too finish it off you can add a LED licenseframe or lights to illuminate your Tag at night using the wiresadn plug off the original tag light. Accomplishes the same results as the inner fender eliminator kit that nobody has yet to come out with for the Raider. If I could figure out how to post pics I would show the end result.

[photo]

check out performanceedge.us
they have everything you need
I posted the tail end of my bike

[gravestarr]

here is a pic of what it will look like if you can't click on the link you can copy and paste.


http://i196.photobucket.com/albums/aa151/yardog102/08%20Raider/FatBack.jpg

[TysonTy1]

here is a pic of what it will look like if you can't click on the link you can copy and paste.


http://i196.photobucket.com/albums/aa151/yardog102/08%20Raider/FatBack.jpg


That looks good. I kind of like the cheap way better. In my personal opinion I think the rear looks too naked when you remove the entire License/Light assembly.

[ldbaize]

Not bad, but I still want to put LEDs to replace those stock blinkers too. Baron's has a great looking replacement lincense plate blinker combo for the Warrior, and are in the process of manufacturing one for the Raider. I will wait.

[gman]

I believe I found what I want for the rear fender. I'm going to remove the plastic fender and install the fender kit and the rear turn signals both made by Raw Designs. They are the same people who make the Reaper Tips. Here is the web site, http://www.metricfats.com/?page_id=10&category=41.

[SS1]

http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/IMID/3793



Part # 9257 in their 2009 Metric catalog