factory aftermarket exhaust for the raider

[little burt]

has anyone tried the factory aftermarket exhaust for the raider yet? if so what do you think of it? did you have to reprogram your emc? thanks for any iinformation on this exhaust.

[gravestarr]

As for the Speedstar Drags I have not heard them but they are ok if that is your style. You do not need to reprogram the Ecm if you just add the pipes and can tolerate the ocassional popping on decel. Just for a FYI seeing as how exhaust choices are limited at the moment. With a little modification you can use Warrior pipes on the Raider. You need to make a new rear mounting bracket and install a O2 sensor. This opens up the pipe selection for the Raider. I just installed a set of V&H Big Shots on my Raider and they sound awesome.

[little burt]

thanks again for the information, i just bought a set off of ebay, should have them in about week or two,will be interesting to see how they perform. burt

[gravestarr]

here is a pic of my bike with the BIG SHOTS!

[photo]

Cobra Dragsters

[halgreenlee]

has anyone tried the factory aftermarket exhaust for the raider yet? if so what do you think of it? did you have to reprogram your emc? thanks for any iinformation on this exhaust.


Not sure if they are available yet. I haven't seen one on a bike.

[kevinfife99]

I just installed Cobra Speedster Swept and I love them. They sound great, and they follow the similar lines of the stock pipes. I had some popping on the decelerating but installed a PCIII Power Commander and that took care of it. I plan on getting it Dyno'd after the 600 mile service. Has anyone Dyno'd theirs and if so, did you like the results?

[mickey]

Here is a set of pipes that I have on my raider, they sound great.

[stokeman]

Mickey,
What kind of pipes are those? That is the look that I've been looking for. Wish you could post an audio clip! I've been told that there was a web site where you could type in your engine and the pipes and hear what it sounds like. Anyone know of a site like that?

[SCRAT]

The pipes that Mickey has are Mortons. Thier web site is mortonscustom.com. They have some nice aftermarket parts for the Raider.

[mickey]

sorry I haven't responded until now my computer was down. Stokeman the pipes on my bike are called raider turndowns, I got them from pacific coast star mickey

[stokeman]

Thanks Mickey. Glad your computor is back up and running! Are those pipes real loud or do they just look that way?

[gman]

here is a pic of my bike with the BIG SHOTS!

Gravestarr can you give us more pictures of the Bigshots. I had them on my Warrior and they look and sound great. What kind of mod is required to install them? Do you have the Patrick Racing Air Kit?, and do you have a PCIII?, and if so, what map are you using?

[gravestarr]

Will work on the pics. The only mod to the pipes themselves are the addition of a 02 bung. Then you need to make a new mounting bracket based on the Raiders mounting location on the frame. The holes are further down and farther apart than what is on the Warrior. I used JB Weld to mount some nuts to the Warrior mounting plate to get the location of the holes and then transfered all the dimensions to a piece of flat steel. Then cut out your shape and mark the holes and start drilling. If you need anything else let me know will be happy to assist however possible.